Od profilnih cijevi sa kotačima (da ga je lakše selit i transportirat). Gore lim ili kada uz poklopce sistemom da se skine radi čiščenja i održavanja. U donji dio konstrukcije stola se strpaju police- nešto kao ormar za alat, plus rezervoar za vodu te sauger / ili mali kompresor.

• Plexi ili kupovna tacna visine 5-10 cm ivodonepropousna. U tacnu treba stat cijeli CNC i ostat 5 cm sa svake strane
• Plexi poklopac koji uđe unutar tacne (da špena i špricanje ostane u tacni
• Sigurnosni prekidač - ako se digne poklopac da mašina stane (hall sensor na tacni i magnetić na poklopcu npr)
• https://www.thingiverse.com/thing:2246287 ???

end-stop senzori sa svake strane, 6 komada

• https://www.thingiverse.com/thing:30253 možda ovo

linux kompjuter za wifi → linuxcnc/gcode → SXCNC pošalje mu se fajl za samostalno glodanje. Može

• PC (micro atx, nuc-alike fanless sa PCI-LPT karticom,
• Stari_laptop (njuškalo, krama) sa LPT portom
• RPI3 ako mu napravimo gpio → lpt flat cabl adapter)

Opremu za stezanje obradaka odmah naručit. Dobar škripac (pazit da nije previsok) i set za stezanje (tipa ovo:

• http://www.alco.co.rs/index.php/pribor/stege-i-radni-stolovi/setovi-za-stezanje-i-vezivanje/set-za-stezanje-58-elemenata)…
• https://www.thingiverse.com/thing:222531 ili ovako nešto 3d printano

set alata za glodanje potrošnih raznih veličina (ebay)

Bulk kvalitetnog aluminija za glodanje npr AlS1Mn 5 mm, 1 m^2

• https://pt.aliexpress.com/af/CNC-Machine-Round-Nozzle-Plastic-Flexible.html?SearchText=CNC+Machine+Round+Nozzle+Plastic+Flexible&ltype=wholesale&d=y&tc=main&blanktest=0&origin=n&catId=0&isViewCP=y
• ili usisavač https://www.thingiverse.com/thing:1953916

• EMC2
• LinuxCNC
• https://github.com/machinekit/machinekit
• Mach3
• neki kineski demo šit koji dođe s njim

• Effective working travel:400(X)mm*580(Y)mm*75(Z)mm
• Shape dimension:880*670*530mm
• Max.thickness of the materials:≤100mm(the distance between Z axis and the bottom of the working station)
• Max.workpiece dimension:750mm*450mm
• Work table dimension:750mm*480mm*20mm
• Frame materials:6061 aluminum alloy + 6063 Industrial aluminum
• Driving units X axis:1605 ball screws
• Driving units Y axis:1605 ball screws
• Driving units Z axis:1605 ball screws
• Sliding units X axis:Dia.16mm chrome plate shafts
• Sliding units Y axis:Dia.20mm chrome plate shafts
• Sliding units Z axis:Dia.13mm chrome plate shafts
• Stepping motor type :57 two-phase 3A ,super-low noise ,NEW
• Spindle motor:0.8KW water cooled
• VFD power: 1.5KW VFD
• Principal axis collet:ER11/3.175 collet
• Spindle speed:24000rpm/min (PWM stepless speed regulation)
• Empty line speed:0-4000mm/min
• Resetting accuracy:0.05mm
• Engraving accuracy:better than 0.04 mm (has been tested)
• Spindle precision:radial runout≤0.03mm
• Control unit:triaxial one-piece drive + ring variable power + PWM speed
• Carving Instructions:G code/TAB files/nc file/NCC files
• Communication interface:through parallel or USB connection with computer
• Software environment:all
• Carving speed:300-3500 mm/min (different materials differ)
• Machine weight:55 KG

• Operating Voltage:110V or 220V 50/60Hz(we also stock USA.UK.EU.AU.plugs.)
• Work theory:3977 3-axis control box with the power supply + spindle speed regulator
• Control unit:3A stepping motor driver plus adjustable spindle speed controller
• Computer connection:on board parallel port,USB
• Command code:G code
• Acceptable software:only CNCUSB
• Protection:Emergency stop button