JP-3163B ver. 3.9
Pin 1: Spindle on/off Relay 1(active low)
Pin 2: X Axis Step (active low)
Pin 3: X Axis Dir (active low)
Pin 4: Y Axis Step (active low)
Pin 5: Y Axis Dir (active low)
Pin 6: Z Axis Step (active low)
Pin 7: Z Axis Dir (active low)
Pin 8: A Axis Step (active low)
Pin 9: A Axis Dir (active low)
Pin 10:Estop (active low)
Pin 11: X Axis Limit Switch (active high) = when NC switch(es) open
Pin 12: Y Axis Limit Switch (active high)
Pin 13: Z Axis Limit Switch (active high)
Pin 14: Buffer Chips “Enable” controlled by computer if Jumper 3 is set to 1-2 position
Pin 15: Probe (active low)
Pin 16: Is supposed to turn Relay 2 on/off but is currently not connected in board.
Pin 17: PWM 0-10V for VFD Spindle AN1 (if jumper 4 is in default 1-2 position) active low
Pin 18: Gnd
Pin 19: Gnd
Pin 20: Gnd
Pin 21: Gnd
Pin 22: Gnd
Pin 23: Gnd
Pin 24: Gnd
Pin 25: Gnd or NC

• https://radiona.org/wiki/_media/inventory/6040z_psu_and_spindle_schematic_for_yoocnc_nt65-3x.pdf
• https://radiona.org/wiki/_media/inventory/6040z_yoocnc_nt65-3x_stepper_controller_schematic.pdf

DB25M na DB25M … kupiti

Mario: Od profilnih cijevi sa kotačima (da ga je lakše selit i transportirat). Gore lim ili kada uz poklopce sistemom da se skine radi čiščenja i održavanja. U donji dio konstrukcije stola se strpaju police- nešto kao ormar za alat, plus rezervoar za vodu te sauger / ili mali kompresor.

Ivica: optimalne dimenzije cijevi za sto bile bi 30x30x1,5. Stol ne bi smio bit na kotacima dok stroj radi, treba stavit podesive nogice s navojem minimalno M12. vani treba ostavit oko 10mm navoja da se moze spustit na kotace.

• Plexi ili kupovna tacna visine 5-10 cm ivodonepropousna. U tacnu treba stat cijeli CNC i ostat 5 cm sa svake strane
• Plexi poklopac koji uđe unutar tacne (da špena i špricanje ostane u tacni
• Sigurnosni prekidač - ako se digne poklopac da mašina stane (hall sensor na tacni i magnetić na poklopcu npr)
• https://www.thingiverse.com/thing:2246287 ???

end-stop senzori sa svake strane, 6 komada

• https://www.thingiverse.com/thing:30253 možda ovo

linux kompjuter za wifi → linuxcnc/gcode → SXCNC pošalje mu se fajl za samostalno glodanje. Može

• PC (micro atx, nuc-alike fanless sa PCI-LPT karticom,
• Stari_laptop (njuškalo, krama) sa LPT portom
• RPI3 ako mu napravimo gpio → lpt flat cabl adapter)

Opremu za stezanje obradaka odmah naručit. Dobar škripac (pazit da nije previsok) i set za stezanje (tipa ovo:

• http://www.alco.co.rs/index.php/pribor/stege-i-radni-stolovi/setovi-za-stezanje-i-vezivanje/set-za-stezanje-58-elemenata)…
• https://www.thingiverse.com/thing:222531 ili ovako nešto 3d printano

set alata za glodanje potrošnih raznih veličina (ebay)

Bulk kvalitetnog aluminija za glodanje npr AlS1Mn 5 mm, 1 m^2

• https://pt.aliexpress.com/af/CNC-Machine-Round-Nozzle-Plastic-Flexible.html?SearchText=CNC+Machine+Round+Nozzle+Plastic+Flexible&ltype=wholesale&d=y&tc=main&blanktest=0&origin=n&catId=0&isViewCP=y
• ili usisavač https://www.thingiverse.com/thing:1953916

• EMC2 / LinuxCNC (str. 36+ iz manuala)
• https://github.com/machinekit/machinekit
• Mach3
• neki kineski demo šit koji dođe s njim

• Effective working travel:400(X)mm*580(Y)mm*75(Z)mm
• Shape dimension:880*670*530mm
• Max.thickness of the materials:≤100mm(the distance between Z axis and the bottom of the working station)
• Max.workpiece dimension:750mm*450mm
• Work table dimension:750mm*480mm*20mm
• Frame materials:6061 aluminum alloy + 6063 Industrial aluminum
• Driving units X axis:1605 ball screws
• Driving units Y axis:1605 ball screws
• Driving units Z axis:1605 ball screws
• Sliding units X axis:Dia.16mm chrome plate shafts
• Sliding units Y axis:Dia.20mm chrome plate shafts
• Sliding units Z axis:Dia.13mm chrome plate shafts
• Stepping motor type :57 two-phase 3A ,super-low noise ,NEW
• Spindle motor:0.8KW water cooled
• VFD power: 1.5KW VFD
• Principal axis collet:ER11/3.175 collet
• Spindle speed:24000rpm/min (PWM stepless speed regulation)
• Empty line speed:0-4000mm/min
• Resetting accuracy:0.05mm
• Engraving accuracy:better than 0.04 mm (has been tested)
• Spindle precision:radial runout≤0.03mm
• Control unit:triaxial one-piece drive + ring variable power + PWM speed
• Carving Instructions:G code/TAB files/nc file/NCC files
• Communication interface:through parallel or USB connection with computer
• Software environment:all
• Carving speed:300-3500 mm/min (different materials differ)
• Machine weight:55 KG

• Operating Voltage:110V or 220V 50/60Hz(we also stock USA.UK.EU.AU.plugs.)
• Work theory:3977 3-axis control box with the power supply + spindle speed regulator
• Control unit:3A stepping motor driver plus adjustable spindle speed controller
• Computer connection:on board parallel port,USB
• Command code:G code
• Acceptable software:only CNCUSB
• Protection:Emergency stop button

• CNC-6040-Router-Engraver-System-Installation-Manual.pdf
• CNC_6040_CNC_6040Z_S65J_User_Manual.pdf